stewbrew1

Here in Derby,Ks. Just south of Wichita. :banana:

Engine fires right up, Odometer says 160K, we are going to repaint, not sure on the color...my daughter votes for Red again

here's a Cherokee done http://wichita.craigslist.org/cto/2187995924.html

We also took off the front bumper, straightened, stripped and repainted My 10yr old has been having fun stripping off the old graphics We also put in a new valve cover gasket Before: After:

We are also working on the bed corner, it sure would have been easier if the made bed patch panels...I wound up cutting the corner off and pounding it out then welding it back on. Before cutting it off Welding back on...forgot to take some pics while it was off Corner after welding and pounding.. Time for bondo

Next we start pulling the floor panels and supports Then we started patching in panels and the new floorboard from Classic to Custom My 10 year old wanted in on the action Seam sealer Now we had to figure out a new brace...Went and bought $3 worth of scrap starting to fab time to fit to the new floor I will post more when I get them welded and cleaned.

This all started several months ago, I have been looking for a project for my family to work on. I have always wanted an MJ (I thought it would be a good first car for my daughter since it will only haul a few people). We looked high and low in our area and were looking out of state when one day on craigslist one finally appeared. We went and looked at it, it had some damage on the left bed corner and the drivers floor was pretty rusty. The guy was asking $500, and we talked him down to $350. I was able to drive it home about 25miles. Here it is sitting in its new home. First thing we did was tear out the interior and started pulling the dent on the bed.

Year, Make, Model. 1988 JEEP Comanche Sportruck Image, if available Engine / Trans / Transfercase / Front axle / Rear axle / Wheelbase - 2.5 / 4spd Build date: (its on the driverside door sticker, in the form of month and year) June 1988 Current Location: Region will do, state, and area of state. Derby, KS Status: Is it still on the road, is it in the junkyard? Project awaiting work? Project in work Notes: Anything that makes this comanche different from the rest. Skid plates, plows, lights, bumpers, weird factory options... Would also be a good place to note the exterior color, and the interior color and combination, IE, Bench or buckets, Vinyl or cloth, column shift or floor shift. - Grey interior, converting to Black from an 87, Bench seat, floor shift. Current owner: Well, you know. Put down who has it, the yard its in, or anything of that sort. stewbrew1

how much if you build another one of those supports?? :D

http://wichita.craigslist.org/pts/2136209520.html

My shipping took 10 days....

They got the FP from C2C it even had their fridge magnet on it when I opened the box... :roll:

Couldn't have said it better myself! Thank you! :cheers:

Let me see if I am getting this.... You bought a set of full pans, and are mad that you didn't get charged for half-pans. Then, when you complained, the company stepped up to offer you a $25 store credit, or $20 back (a lot of the price difference you are complaining about to begin with), and you are still mad? :doh: I bought a half pan for $75 + $20 S&H that was supposed to be represented by a picture on the site, the pan that came was an inferior half pan (that I could have bought on ebay (see my link in the original post) for almost half the price$40 + 15 S&H. It seemed more like a bait and switch, It just seems if they are going to sell a C2C pan that is what should be represented. C2C has photos on their website....it is just a matter of proper representation. On Motions site it does say the product may vary slightly, but even the rep at motion thought it was a big difference....but they didn't feel bad enough about it to let me return it...

I got a call from Motion this morning asking what the issue was, they looked at the floorboard difference and could see where i was not happy, but appearently they do not accept returns on bogus items so they were going to send me a $25 gift card for Motion Offroad...I told them them I could not find anything else to buy from them so I asked if they would just credit me back the $25, they would only credit back $20...Times must be tight to piss off your customers....Does any one know of a place I could buy a floorboard that looks like this: http://motionoffroad.com/catalog/index.php?main_page=popup_image&pID=1228

So i ordered a Driver side replacement floor board from Motion because from the picture and description on their website looks like a superior product and they send me one from C2C. The one on C2Cs website is almost half the price. I have tried calling, left a message and sent a Please contact me from their website and no answer. Has anyone else had an experience like this before with them? Just makes me mad they sell me a $40 floor board for $75 and charge me an extra $5 on shipping....Oh and they left the C2C sticker on it.... http://motionoffroad.com/catalog/index. ... ts_id=1228 http://c2cfabrication.com/store/product ... ucts_id=72 http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0525405512 I will post some progress pics later this week