littlezeeker

Did A lift on the back but forgot to take pics as i did it :doh: 9ft Ceilings in my shop

With the lift kit I'm going to put in i need a Jack that and lift it

Been A while and I'm sorry but here's some more update photos

Check out my jeep "project tough truck" I made my own wiring. Diagram and everything to help people up grade those old tail lights to some new mean LED tail lights.

here's a short Video of my Halo Lights sorry its hard to show how cool they look without a glare LY709OZcRKc

Your Welcome made it kinda fast and off the top of my head but i hope it will help you out a little bit.

Oh on last thing you will need an Extra person or two to hold crap for you and another to press the brake and stuff. and plan on it being a couple of hours just figuring out the wiring problem. it takes awhile.

Ok There Are a lot of Wires Back There Be Don't be to scared Its not too bad. :???: Buy Extra Fuses :???: Cut Out Light bulb Assembly off driver side FIRST :???: Find out, and Mark Bake, running, D Blinker, P Blinker, Reverse, Ground wires from cab with tape. :???: Now wire your driver light up but leave it hanging your not done with it. :???: Cut Out Light Bulb Assembly for passenger side :???: do a continuity on each wire running from the driver to passenger side and mark them with tape :???: then wire it in the same way you did the driver side. Wiring With NO Reverse LIke my truck is set up Wiring With Reverse lights Some May make and extra bulb just for reverse

My Tail Lights Were simple after i found out what wires did what on my truck since the tail lights and just trailer tail lights, made it were running lights are dim red and then brights are for the brakes and the brights flash when i turn the blinker on. and for the third brake light up top i just ran a jumper wire from my brake pedal switch to the bed light switch. this comes in really handy since i don't have reverse lights i flip on the bed light switch and all 3 LED brake lights light up making it really easy to see.

Which LEDs I Have Them on the back and front and even a third brake light and no i don't have a thread but I've had a few people ask about my LEDs do i might just do a thread for everyone.

Put My Halo lights in GMot4D-fFp4 kRTCjfMM1yc

As of right now just the the small front marker flashes i have so relays on order so i can make to side makers flash too and say on as side makers at the same time. and thank you

My Youtube videos for my step-by-step of my Truck Part 1 g4oPe7hv9fk&feature=mfu_in_order&list=UL Part 2 dIJwOhKwafg&feature=mfu_in_order&list=UL Part 3 qtrIdgZDWL8&feature=mfu_in_order&list=UL

:D here's What my Truck Looks up right now, until my new Rims and Halos head lights come in the next couple of weeks :wrench:

here's A Short Video of My Need Fog Light Look Compared to the old Fogs lights. P5LBzJfcm6I

I'll Do a Full Right up in the Next couple of days, but i got the brake light at a truck stop/gas station/store on a trip.

:banana: New LED Fog Lights :banana:

New Tool Box :D

I was Thinking about buying some super Swampers not sure what kind yet but wondering whats the life time of them it u drive the roads maybe 6000 miles a year? thank you

yes for a matter of fact new rims is the very next thing on my list with 3" back spacing to make my tire stick out even with my finder flares :D

yes big time you don't hear much road noise or anytime any once i put new weather striping around my doors it will be as quite as a new car :D and thank RockMJ

:wrench: Update on My Truck * New exhaust system sounds and runs better * New LED Third Brake Light * New Lettering to fix my mess up with not measuring with my fender flares * Added more red to the plain black truck * New Speakers in the doors

either I was just need some info of lenghts or shapes or what size metal to use short arms or long arms

I'm going to Build some Custom Control arms for my 2.5L 1986 Jeep Comanche x 4x4 and need some help with the specs, I'm going to do a 6 to 7 inch left, and i have a d30 up front I'm looking more at a Y-style control arms but for now please anyone with any blueprints or tech specs on sizes or in drawing please send them to me or email me if easier at littlezeeker1@gmail.com please send any info you have at all about any homemade control arms, size, set up, angles and etc. Thank You All :wrench:

its a 2.5l 1986 comanche X