aperseghin

i have an 88 pioneer viewtopic.php?f=32&t=25385

waiting for them to call back.. is this what i need? http://www.carbodyparts.net/1987-jeep-c ... 97900.html

i have a nice step bumper but need rear bumper brackets..

ok so thats just the front lifted correct.... i know someone has a pic with a 2 inch spacer and shackles in the back (1.5-2).. I think its gonna be fine for what i need... what can i fit under a 2 inch lift?

anyone have a 2 inch pic?

looks good actually... what kind of lift is it?

he is local for me so i just met him at the mall one day and picked em up.. :)

Just would like to see what a budget lift (spacers and shackles) will look like on my Comanche

i have these http://cgi.ebay.com/ebaymotors/Set-6-UP ... 950wt_1026 and i got a 3mpg gain.

Ok here is what I have 88 2wd efi aw4 172k I'm getting like 12 miles to gallon I have upgraded the injectors to 4 port I have changed air filter New tps/harmonic balancer/serp belt/spark plugs Oil change I do have a leaky exhaust with no cat could that cause an issue? What else should I do to it?

i have the double platinum in mine, cost me the same as the copper because i know a guy. they seem to work very well. whats all this about grenading a piston?

Is there a tcu for the renix aw4 setup? The shift points could be a little smoother and probably save gas as well?

Explain? Newer style as in from a newer mj or xj? I 88 pioneer I6 aw4 2x4 renix

So my valve cover is leaking and its time for a change. What else should I do while the cover is off if anything. Other than clean and paint the cover.

resolved.. valve cover gasket

i don't understand any of that.. can you give me more detail?

Ok so if ifind a loaner truck in the yard, I can remove the aw4 tranny and and transfer case and axels etc, and bolt them up behind my engine?

That makes snse, I have an aftermarket coolant temp sensor installed, as for the vacuum line, where is it? Where should I be looking, is it a major issue or what? -Posted from my blackberry

i have an 88 renix automatic efi. its a 4 speed. What trany do i have and what are my options to make it 4wd?

ok here is the squeal and where i think it is click pick for video also anyone know what those 2 connectors go to? the ones that are not connected to anything

88 auto efi 4.0

i have a known exhaust leak so I'm gonna fix that before going any further

is there a post anywhere describing all these vacuum lines, like which ones i need and what they are for?

interested.... pm me this "cheap" number you speak of...

its an 88 4.0