Northup

can you tell if the sound is coming from the rear or the front?

does it only make the sound while moving or traveling over a bump? I had a similar sound on my YJ replaced the shocks and tranny mount. Found out the sound was coming from my track bar.

unplugged the blower motor resistor and still no start. All the fuses are good under the hood and dash. Battery is brand new, and the cables look solid. I will be going over the cables/block ground better after work tomorow if it ever stops raining.

True, where do the two connect? Is it in the steering column or dash? Also wouldn't if it was drawing to much juice from the ignition to kill the truck, wouldn't when the fan was off it would be able to start? Its still raining hard out so I may have to wait till tomorrow for a serious amount of time. Anyone have the ignition or fan electrical wiring diagram anywhere. Also are the fans/heater or ignitions the same out of a Cherokee? If i need to pull parts out of my local yard?

what is the specs on the lift. and company or companies that the parts came from

could be a short but I don't see how the controls on the heater would effect it. LIke I said i've had the truck for 2months no starting issues, and as soon as i Touch the fan from off/vent/etc i had the issues. I don't see any frayed wires and the grounding strap from the engine looks solid.

All i see really when I looked under there were plastic covers. I took one of the covers with 2 screws holding it on off. Under it was a plug with 4-5 pins. Unplugged that and it still didnt start. Ever since I figured out the heater was causing it the 2nd time I turned it off it has not been able to start again. Last time it just randomly started working again. I also am not sure if it was from turning the blower fan on or off. When the first time it stalled on me I had the fan blowing, and I checked the heat to make sure it blew hot, then turned it off and the truck stopped. 2nd start up after towing it home I just slide the fan switch from off/on back off and the truck died out. So I am still searching to answers but its hard to test whats causing it when i can't get it to start up again. Sorry if i am confusing people with details or responses. Just trying to clarify more things. Going to search for some pics of this resistor to see what exactly I am looking for

no Idea. Have not tried to really work on it yet. Where is that resistor at? Under the dash by the fuse block or somewhere else?

Ya, I was definitely thinking it was something electrical, but have no Idea where to look. I thought all the fans were vacuum operated switches. If anyone has any other Idea it would be appreciated.

So driving the truck last night on Rt4. go to take the exit but decided to see turn the fan off and the truck just turned off. Wouldnt start up or anything. Get it towed home, and this afternoon it starts up fine. Start it up mess with the heat controls and same thing truck just shuts off. Any suggestions on where to start looking/problem solving? 1991 4.0L 5spd no a/c pioneer.

Thanks so much for the links and help!! The color name is Black Cherry. Once I finish the power steering pump I will be moving back to the body work and will post some photos.

I was wondering what my original paint color on my comanche is called. I would like to repaint it myself as close to match as possible. Rust is being fixed its a really dark marroon. Was wondering if someone knew the name 1j7fj36sxml520483

Theres a complete Manche in a Junkyard in RI I was looking at last weekend. Guy doesnt want to part it but is looking to sell whole. I wanted the rims off of it. Think it was an 88-90 2wd long 4.0L 5spd. If you want to know where or are looking for a parts truck send me a PM and ill let you know more about it.

Looks like a decent parts truck for someone if they could get the price a little lower http://southcoast.craigslist.org/pts/1788190081.html

ya i found that and removed the pressure. Fitting still does not want to come off. Going to work on it more in the AM

Thanks Fiatslug that is exactly what the doctor ordered. Now the next question is anyone know how to realease the fuel pressure? I think I have a wrangler chilton around it should be similar.

Was in the process of taking of the intake and exhaust manifold to get at a freeze plug and have run into a little snag. Mj is a 1991 4.0L There are 2 fuel lines that rune to the fuel rail. The lines don't want to come off the fuel rail. Is there a secret to get these lines off? They seem to be a push on connector but I can't seem to budge them.

I am located in East Greenwich / North Kingstown area. Where you guys all from in RI? Yes that was the add you pm'd me I already owned it at the point in time. I bought it on the 28th. Thanks for the help though. The truck is from ashaway. She used it to haul hay and it was her sons first vehicle before that. They had owned it for about 7years. I would love to know what the name of the color jeep uses there so I could paint it close to stock coloring when I start all the body work. Anyone know what jeep color that is?

Do they still sell these or do they still have the rocker replacements? can't seem to find it on their site anymore. If not who is selling good rocker replacements

Finally found an MJ that was cheap and not a total basket case that would cost me less then $1000 ended up costing me 450$ after the tow specs - 1991 MJ 4.0L 5spd 166k miles New radiator and brake lines frame look great First things to do- Clean out interior, Freeze plugs and fix brakes then rust repair on body bed. Floors are not bad but I will need a patch or two I am sure Rust isn't too bad rockers, and some here and there on the bed. Uploaded with ImageShack.us

I'm over in North Kingstown. Thanks for all the post still looking. Emailed the CL one in ipswick and just waiting to hear back with more photos. Would love to have one located in RI so I don't have to drive 2hrs to test drive and look it over.

Thanks for the link jeepcoma. I have been trying the common misspelled searches. That ones nice I emailed him but price i think is a little high. Would like to find one in the 2,000$ range is my goal

I have 12 chickens in the back yard also and its funny where they will decide to lay. I had 2 of em decide they wanted to nest ontop of the pine shaving bail in the corner. The plastic didnt even bother them

http://newlondon.craigslist.org/cto/1718754574.html from april 30th ad is still up don't know if it is still there

heck ya for another RI fisherman. Here is my PB in freshwater. Caught in 2002 at Johnson Pond 7lbs 3oz Saltwater fishing has been slamming I got 4 keepers last week. All around 18lbs or so.