buddy208

got it about where i want it to be home made bumper

how much lift can i have before i need a slip yoke eliminator

how long are they orginally

does anyone know what length to make my arms with about 4'' of lift

what size tubing should i use to make my own control arms

i thought there was more like the ford 9'' and i was talking about full size axles

cause there hard to find in my area and i just want to know what other vehicles axles i can use

other than jeep axles

what half ton axle would fit my bolt pattern of my comanche which is 5 on 4.5

its a brand new o ring i just bought a new tank about two months ago and i took the sending unit out cause my fuel gauge was off and the o ring keeps expanding so i have extras and put one in the fridge and will put it on tomorrow or tuesday

i took apart my gas tank and sending unit and then but it back together but the o ring is too big to go back on how do i fix it.

yea

anyone know a good mj/xj magazine other than quadratec

where can i find the rear bumper plastic ends

the guy we talked to said it should be between 6 and 8 i think

I'm in the middle of building a rear bumber and was wondering how i would mount it on my truck can some give me ideas or pics of how theirs is mounted

we put a steel plate up to both ball joints and measure the angle from there

well we extended the stock control arms but will be making some out of tubing soon

i measured my caster angle which the top ball joint was 15 degrees from the ground towards the back tire which some one told me i need 6-8 but the wheels sit perfect in the middle of the wheel well, so does any one know if i should extend the top control arm or bottom

well i just put them on i put one over top of the other

can i get pics

I'm in the middle of replace my power steering hose and forget which hose goes to what hose on the steering box, the engine is off a 94 cherokee if it matters

what i meant was the dimensions

can some one give me a drawing of how to make one

how do i put tow hooks on the front end of my mj