89Tonto

Looking for a factory black MJ step bumper for a friend of mine. Nicer the better. Hopefully something in the Louisville (IN, OH,KY) area. Feel free to send me name, contact number, picture and cost and hopefully we can make something happen. Thanks!

Trying to help a buddy out. He needs at least one rear spring to get his MJ off the lift. If he has to buy two, he probably will. To cut down on cost/shipping, looking for something around the Indianapolis/Richmond, Indiana area for easy pickup. What do you have in your pile? Thanks...

THIS WEEKEND!!!

Saw this and fell in love with it. Although they used a FSJ tailgate, an MJ tailgate could be considered a love seat. Has anyone one made any Jeep furniture that you would like to share with us?

A friend needs a manual tranny for his 89 MJ with 4 cylinder 2WD. If you have a good one around the East Central Indiana/west central Ohio area, please contact Kerry. jpksloven@gmail.com or call/txt 765/520-8288.

Thanks Eric :bowdown:

Thanks Skidoo_i: Those were perfect! :thumbsup: Bornindesert: you are 100% correct. I would be dealing with a '86 rusty mess. It would take power tools, a torch and plenty of patience. Thanks for your input. I wish I had known sooner about these brackets before that SWB donor MJ went to scrap pile last year, :doh:

In removing a MJ rollbar from a donor, I understand there are plates under the bed that should be kept. Under kicker legs and front hoop. Are there other bracketry under the front hoop that should/could be removed? Somehow I remember seeing some on a factory drawing of some sort. I might be wrong... :???:

SWB or LWB?

Haspin Acres- Laurel, Indiana

No two/four post lift. MJ has a 4"- 5" lift on it. Therefore I have some room to crawl under. Go down from the top or up from the bottom? Remove crossmember? Lift motor and undo driverside engine mount? Already have the bottom bolt out. Trying to lossen up the top one. I'm sure there are some mechanic tricks that I need to learn.

We are now on a search for a 91-95 COMPLETE 4.0L engine and tranny (AW4) wiring harness. :thumbsup:

THANKS!!!! :cheers:

I need some help determining the year on a 4.0L that a buddy picked up in a trade. It is completely different then my 90 4.0L (renix) motor. This motor has 909MX- 11 or II on the valve cover. I would say its 91-92 or newer. On the valve cover of the donor 4.0L is 009MX25. Trying to determine the year so I can find the correct range of engine harnesses for a swap into a CJ. :thumbsup: Do you need more info or can someone help me on what I have posted.