mknherhappy
Members-
Posts
105 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by mknherhappy
-
How to install Factory Brush Guard, Pictures?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
The brush guard or maybe "Bull Guard" is a better term that I am talking about, doesn't appear to attach to the frame rails, like in the picture, it appears to attach directly to the bumper, doesn't have any brackets that go underneath at all. The Bull Guard is only about 24" wide, maybe not even that wide. Thanks again. -
Anyone run Pro Comp tires? If so, what do you think of them? Thanks for your input.
-
How to install Factory Brush Guard, Pictures?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
How did yours install? The one I bought is a Grill Guard, not brush guard as I said in an earlier post, not sure if they install differently. Do you have a picture? -
Want to replace the topper on my 88 long bed. What other pickups share the same bed size, if any. Thanks again for your help.
-
Changed the plugs, wires, rotor, and cap. Still turns over several times before firing. Does start every time, but, would like it to fire quicker. Any ideas or suggestions? Thanks again for your help.
-
Changing the serpentine belt. Any advice?
mknherhappy replied to Luvtohunt's topic in MJ Tech: Modification and Repairs
If you do not have air conditioning, does it make any difference? -
Violent Shake? Any help?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
Hope this works for you, I went through everything, things got better, but I still have a shake when I hit a rough bump over 55 mph. Hope new tires help???? -
Changing the valve cover gasket, How difficult?
mknherhappy replied to Luvtohunt's topic in MJ Tech: Modification and Repairs
Think I will order them, what are the parts called? Again, Thanks for your input. -
Changing the valve cover gasket, How difficult?
mknherhappy replied to Luvtohunt's topic in MJ Tech: Modification and Repairs
Do the tube/hoses the are in the valve cover just pull off? I tried a little to pull them off, but they seam tight and I do not want to break anything if I can help it. -
Ya, sorry, its an 88 with the old pressure bottle system.
-
How do you know if your track bar is worn?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
Do you do this while the truck is up on jack stands, or when it is on its tires? Thanks again. -
then do I just run water through the coolant overfill? Thank you for the information.
-
1. Replace the Thermostat. 2. Check the condition of the hoses, might be getting sucked shut. Quality hoses have a spring to prevent this. 3. Flush er out if 1 & 2 don't get results Thanks, going to have it flushed out on Monday. Wanted to do it myself, but, cannot figure out how to do it with the petcock rusted shut and the overflow bottle system.
-
My MJ has been giving me fits by overheating. Checked the fluid levels and all is good. Drive it daily with no problems, then about once a week it will overheat. Any advice?
-
Violent Shake? Any help?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
No noise at all. Actually drives and rides like a dream, UNTIL I hit a series of bumps... -
Violent Shake? Any help?
mknherhappy replied to mknherhappy's topic in MJ Tech: Modification and Repairs
Thank you for the information. How do I check for this condition, or am I better off going to a shop? I am not very educated in this field. Thanks again.
