4 cyl / 6cyl swap

Are the engine mounts in the sae location in the 4 cyl MJ's , I am going to swap in a ho 6cyl

Engine mounts are different, but easily re-done.

And welcome to the group!

Rob L.

Thanks

I have never owned a 4 cyl xj / mj before , but I have had 4 xj's and one mj , all 6 cyl

If you could direct me to a link to a thread on what to do , It would be greatly appretiated

Pic of my xj

My MJ build

http://nsjc.proboards.com/index.cgi?boa ... read=26502

Unbolt the 2.5 frame horns, bolt on the 4.0 frame horns. :thumbsup:

Unbolt the 2.5 frame horns, bolt on the 4.0 frame horns. :thumbsup:

Hahahahaha OK then :nuts:

Unbolt the 2.5 frame horns, bolt on the 4.0 frame horns. :thumbsup:

 

 

Hahahahaha OK then :nuts:

Ok never heard of this before , but have read about a few people having to do this same thing , I thought you were pulling my leg

Anyone have a little pix / write up of this for visual effect ?

no joke. It's just that straightforward. :D (assuming that rusty bolts don't ruin your day) The engine mounts are bolted to the frame (unlike YJs, where the mounts are welded on).

no joke. It's just that straightforward. :D (assuming that rusty bolts don't ruin your day) The engine mounts are bolted to the frame (unlike YJs, where the mounts are welded on).

Wicked , Thanks Pete :bowdown:

I didn't realize it was that simple :oops:

If you could direct me to a link to a thread on what to do , It would be greatly appretiated

Hopefully somebody that has done it can give you some more specific information, but basically you need to swap over everything from the donor - wiring, linkage, computer, dash, etc. Not only are you going from 4 cylinder to 6 cylinder, but also from AMC to Chrysler.

Is that same XJ donating the engine?

You've got a great group of friends. It's very cool to see all of them helping you. :thumbsup:

Willy