Newton Posted October 16, 2016 Share Posted October 16, 2016 So i was trying to adjust my tps.. the input voltage I'm getting is 4.19 and output voltage is 0.74 i replaced the tps sensor and getting the same exact reading with the new one i recently cleaned the throttle body and sensor ground seems to be fine the truck idles kinda ok but every now and then i can hear the idle dropping a little or picking up a little its not I'm guessing it should idle a little smoother than that don't think i have any vaccum leaks last i checked..so from what i read on the tps adjustment my numbers are completely off any ideas what could cause me to get those readings..possibly both sensors are bad? Link to comment Share on other sites More sharing options...
tugalo Posted October 16, 2016 Share Posted October 16, 2016 First test is to check the accuracy of your meter. Link to comment Share on other sites More sharing options...
Newton Posted October 17, 2016 Author Share Posted October 17, 2016 First test is to check the accuracy of your meter. Lol wasn't my meter think I was probing the wrong connector Link to comment Share on other sites More sharing options...
cruiser54 Posted October 17, 2016 Share Posted October 17, 2016 http://cruiser54.com/?p=54 Link to comment Share on other sites More sharing options...
Newton Posted October 17, 2016 Author Share Posted October 17, 2016 thanks cruiser got it.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now