dakal Posted May 2, 2008 Share Posted May 2, 2008 does anyone have a broken computer for a renix engine? i need some parts from it. let me know, and if you do, we'll work out something for the exchange. :bowdown: Link to comment Share on other sites More sharing options...
Wildman Posted May 3, 2008 Share Posted May 3, 2008 I don't have any "Broken" ECM's but I have a few of the different ones, which one do you need??? Year and Auto or Manual?? Or the last 4 digits. Link to comment Share on other sites More sharing options...
dakal Posted May 4, 2008 Author Share Posted May 4, 2008 1 have a 1988 no markings comanche. it has a ax15 that was put in it. i have no idea what was in it before. maybe i should get the # off the computer? no junk yard around here has one, so i'm stuck. Link to comment Share on other sites More sharing options...
Geonovast Posted May 4, 2008 Share Posted May 4, 2008 I've got three renix ones sitting around... 87 4.0/4x4/5 speed 88 4.0/4x4/5 speed 86 2.5/4x4/4 speed I know the two 4.0 ones are good, no idea about the 2.5, never ran the truck. Link to comment Share on other sites More sharing options...
Wildman Posted May 4, 2008 Share Posted May 4, 2008 1 have a 1988 no markings comanche. it has a ax15 that was put in it. i have no idea what was in it before. maybe i should get the # off the computer? no junk yard around here has one, so i'm stuck. If your have a '88, 4.0, manual transmission, the ECM would be a #5300 5407. The Number will be in very bold print on the unit. You didn't say what engine you have :dunno: And I don't have any 2.5 ECM. The only difference on the ECM's is the 2.5 or 4.0, Manual or Automatic, and of course - '87-88 and '89-90. Link to comment Share on other sites More sharing options...
dakal Posted May 4, 2008 Author Share Posted May 4, 2008 i have a 4.0 ok, where is the computer located? behind the glove box? Link to comment Share on other sites More sharing options...
Wildman Posted May 5, 2008 Share Posted May 5, 2008 Then you would need the #5300 5407 ECM. The ECM is mounted behind the dash, just above the gas pedal, to the right, like behind the heater controls, you can pull it out, by removing a screw and slide it down, to un-hook the connector, with out removing the dash. It will be the big silver colored box, about 6' x 8' x 1". Drop me a PM with your shipping info, and a fair offer......and I'll ship one out to you ;) Link to comment Share on other sites More sharing options...
dakal Posted May 5, 2008 Author Share Posted May 5, 2008 ok ok, computer # in bold print # ef8953005226 in small number in corner of the box 8736 made in france the computer was bolted on with three 8mm bolts i took off two of them to get the number, the top bolt is a pita to get too, but if necessary i can remove it to drop the computer down. engine # 903 mx 27 what year is engine? its in a 1988 comanche, but i have found some strange things on this vehicle so-------- :brows: :chillin: Link to comment Share on other sites More sharing options...
Wildman Posted May 6, 2008 Share Posted May 6, 2008 :hmm: I searched '81-'93, 5k pages and could not come up with that number :dunno: What your saying is, you have a 5300 5226 microprocessor and what my parts list calls for is a 5300 5407 for a '88 w/manual transmission. The only thing I can think of, is to go thru the pile of ECM in the shop, and see if that number shows up......I got all the #'s to take with me. but i have found some strange things on this vehicle so-------- Yea.......I think so :???: made in france Yea.......they all are = Renix ;) If the 3 screws were still in the bracket, then it could be factory installed?? I guest the next question is........what's wrong with your ECM now??? Footnote: I cross checked a couple supply houses, came up with this- Cardon # 792858 Picture here Niefoff # 5300 5429 Standard # 5300 5429 Link to comment Share on other sites More sharing options...
dakal Posted May 6, 2008 Author Share Posted May 6, 2008 nothing is wrong with my computer. i just need the hook up on the computer that hooks to the engine harness. i am going to build a megasquirt for my mj. the parts america picture isn't mine. i will take off the last bolt, and take a picture; tomorrow do you think a xj computer would be the same? renix and all that? if i could find a bad one. i hate to tear up a good one. :popcorn: Image Not FoundImage Not Found i need the black conections you see in pictures [/img] does yours look like this? Link to comment Share on other sites More sharing options...
Geonovast Posted May 6, 2008 Share Posted May 6, 2008 Xj computer is identical. Link to comment Share on other sites More sharing options...
dakal Posted May 6, 2008 Author Share Posted May 6, 2008 pics :cheers: Link to comment Share on other sites More sharing options...
Wildman Posted May 7, 2008 Share Posted May 7, 2008 I did find one :D Looked thru about 10, and the last one.......Here a picture of it, but I didn't take a picture of the connector :cry: so......either my parts list is wrong......or I'm going :nuts: And when I removed this, I wrote '88, 4.0, BA10 on the ECM. So, what ever you want to do, drop me a PM and we'll take it from there. Link to comment Share on other sites More sharing options...
dakal Posted May 7, 2008 Author Share Posted May 7, 2008 check the connectors, if the same let me know. i'm interested :bowdown: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now