ejndssn Posted May 5, 2006 Share Posted May 5, 2006 As you folks already know i was and still looking for ax-15 external slave bellhousing setup from the local bone yards and a very hard fine so far and no luck some on the net but the price is very high. just wondering :idea: if i would tap and bolt the internal slave in place and apply some loctite would this work. until i replace this with an external setup. any suggestion would be greatly unless one of you folks happen to have one your back pocket :D Link to comment Share on other sites More sharing options...
Cabz Posted May 5, 2006 Share Posted May 5, 2006 As you folks already know i was and still looking for ax-15 external slave bellhousing setup from the local bone yards and a very hard fine so far and no luck some on the net but the price is very high. just wondering :idea: if i would tap and bolt the internal slave in place and apply some loctite would this work. until i replace this with an external setup. any suggestion would be greatly unless one of you folks happen to have one your back pocket :D Nope :cry: The internal slave bell houseing does not use a release arm , the slave pushes directly on the P Plate. The external BH has a release arm that the slave pushes on . In short your gonna have to pull the trans either way. Link to comment Share on other sites More sharing options...
ejndssn Posted May 5, 2006 Author Share Posted May 5, 2006 sorry folks let me mention that i have replaced the internal 2x already and lost the flared roll pin in its place i would be the bolt vice the roll pin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now