jamespwsullivan Posted January 12 Share Posted January 12 I'll be honest, I'm not ready to pull the trigger, but I think I'm going to need a good, working AW-4 to replace mine. I have a 1987 longbed so I think I'm looking for an aW-4 1987-1990 so the ECU & TCU will work with it. I am also considering swapping in a NP242 so it would need to be from the same era to match the 21 spline shaft. I'm posting here because I would rather deal with someone knowledgeable about MJs and XJs than an online parts seller or individual who may not know much about what he or she has. I can travel in the MIdwest to pick up - based in Indianapolis Link to comment Share on other sites More sharing options...
JolietJEEP'84 Posted January 12 Share Posted January 12 I've got the 242 from an 88 XJ in Joliet , IL Link to comment Share on other sites More sharing options...
jamespwsullivan Posted January 13 Author Share Posted January 13 14 hours ago, JolietJEEP'84 said: I've got the 242 from an 88 XJ in Joliet , IL Is it from a Jeep you are familiar with? in other words, was it working properly when you pulled it? You can PM me if you want. Link to comment Share on other sites More sharing options...
Recommended Posts