MikeM Posted September 18, 2022 Share Posted September 18, 2022 4.0 swap and thought I was all finished, went to take her on first drive but no brakes, bleed all the lines and re checked vacuum hoses, still nothing. Changed out booster, nothing. Press on pedal and goes all the way down and have a hissing noise when I press pedal, any idea’s? Link to comment Share on other sites More sharing options...
JYau Posted September 19, 2022 Share Posted September 19, 2022 Were the calipers removed and put back on during the swap? Check to see if you accidentally swapped calipers as there is a right one and a left one. Is the Brake Warning light on? Link to comment Share on other sites More sharing options...
Eagle Posted September 20, 2022 Share Posted September 20, 2022 Hissing sound = vacuum leak. Check all hoses. Try to isolate the location of the hissing sound. Link to comment Share on other sites More sharing options...
Shoveldead Posted September 20, 2022 Share Posted September 20, 2022 +1 on vacuum issue. As you know the vacuum lines in these things do tend to dry rot and fall apart Link to comment Share on other sites More sharing options...
howeitsdone Posted September 20, 2022 Share Posted September 20, 2022 If you pump the brakes with the motor off does it build pressure? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now