mjeff87 Posted April 26, 2020 Share Posted April 26, 2020 So I munched up the connector end of the CPS on my Focus while dropping the transmission (CPS itself is fine though). I cut out 2 connectors with plenty of wires from the junkyard today, thinking I could de-pin one of them and install the connector body on my existing wires. I really don't want to cut/splice the wires considering it's the CPS and voltage is kinda sensitive. I got the connector body off but can't figure out how to get the wires out....anyone have a tip/trick to this? It's a 2-wire Ford weatherpak connector. Maybe it's not even possible? Link to comment Share on other sites More sharing options...
jdog Posted April 26, 2020 Share Posted April 26, 2020 Pull the white center out, after that you should be able to see the lock Link to comment Share on other sites More sharing options...
mjeff87 Posted April 26, 2020 Author Share Posted April 26, 2020 Thanks. I'll give that a shot Link to comment Share on other sites More sharing options...
mjeff87 Posted April 26, 2020 Author Share Posted April 26, 2020 Got it jog...thanks! Glad I pulled 2 of the connectors out of the junkyard, I learned myself (and broke) the first one. Once I figured the mechanics out, I was able to unpinned the second one, pull the wires out of my broken one, and put it all back together. Link to comment Share on other sites More sharing options...
jdog Posted April 27, 2020 Share Posted April 27, 2020 Glad to hear you got it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now