Pannicthrottle Posted May 17, 2018 Share Posted May 17, 2018 Be for I try is it truly that hard to press out the stock control arm bushing. I have enough funding to by the ball joint press and the bushings. Or just by new stock control arms. Any suggestions Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted May 18, 2018 Share Posted May 18, 2018 lowers or uppers or both? also, please try not to post your questions in the 1989 VIN forum. Link to comment Share on other sites More sharing options...
Pannicthrottle Posted May 18, 2018 Author Share Posted May 18, 2018 lowers or uppers or both? also, please try not to post your questions in the 1989 VIN forum. Sorry. I don't know what I'm doing. I swear I can turn a wrench though lol I'm also repalcing both.Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted May 18, 2018 Share Posted May 18, 2018 for lowers I would do new WJ arms (fully boxed with a bend for tire clearance). just need to trim the steel bushings flush so they fit inside the pockets (and maybe a bit of the arm end itself as shown in the pic). in fact you can do WJs for uppers too. the bushings set in the axle are the only sticking point left since they are, well, in the axle not the upper arms. Link to comment Share on other sites More sharing options...
Pannicthrottle Posted May 18, 2018 Author Share Posted May 18, 2018 That's an amazing answer. Exactly what I will do. What's a wj?Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted May 18, 2018 Share Posted May 18, 2018 99-04 grand cherokee Link to comment Share on other sites More sharing options...
Pannicthrottle Posted May 18, 2018 Author Share Posted May 18, 2018 When you say box in I'm sure your meaning weld flat stock over open back u shape stock then. Trim all factory edges? Upper will be get another set of lowers and make work? And this will let tje front axel sweep fowrad but centering more under the block from swinging down a few inches? Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted May 18, 2018 Share Posted May 18, 2018 I mean the WJ arms are already fully boxed. and use WJ uppers as uppers. they are all the same length as MJ arms, just better built. notice that I nipped back the top arm int his picture: Link to comment Share on other sites More sharing options...
Pannicthrottle Posted May 18, 2018 Author Share Posted May 18, 2018 I see no real major advantage what ever I can get my hands on.Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted May 18, 2018 Share Posted May 18, 2018 both XJ and WJ arms are widely available new. Link to comment Share on other sites More sharing options...
Pannicthrottle Posted May 18, 2018 Author Share Posted May 18, 2018 So I just pulled the trigger on new wj control arms and new moog.bushing for the axel thanks for the help Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now