Jump to content

Fuel Line Quick Connector Retaining Clip


Recommended Posts

I found this pic online of a clip that prevents fuel line quick connector from separating. They were on an XJ and were a factory part for 5/16" and 3/8" quick connectors. I've been looking through my parts manuals for them with no success. Anyone know the p/n or seen them before? I'd like to put them on all my fluid quick connectors.

RetainingClip.jpg.d2d74b13c132ed83db75eb96eb4972fc.jpg

 

GM also makes a similar clip that would work. Anyone know a p/n or source?

redundant-clip.jpg?interpolation=lanczos

Link to comment
Share on other sites

Thanks Pete-man. Your info enabled me to find the GM clips on Ebay HERE. I know I can find them cheaper with a little searching. They are supposed to fit both the 5/16" and 3/8" quick connectors. And the GM vehicles use the same type quick connectors that our MJs do. Should work fine for both fuel line and A/T fluid line connectors. Cheap insurance....

 

15744392_p.jpg

Link to comment
Share on other sites

I had a an A/T transmission line blow off the radiator awhile back, my own fault I think because I didn't have the connector fully seated, and luckily I got off the road before any damage was done, besides the mess. I have the connectors safety wired for now, but these retaining clips will be great if they work.   :L:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...