Jump to content

Awe floor shifter cable routing


Recommended Posts

There may be another post answering this question but I was unable to find it. Feel free to post a link if you know where it is.

 

Scenario: I have an 89 eliminator, aw4 Trans on the floor. The cable was missing when I bought the Jeep. I purchased a shift cable with the length of 57".

 

Question: Does anyone know (possibly have pictures) the routing of this cable? It doesn't seem long enough to route through the firewall near the brake booster like I have seen.

Link to comment
Share on other sites

Theres a hole in the tranny tunnel, just back of the firewall.  It's a bit of a pain to find but it's there.  I'll try to get a picture of it tomorrow.  I have my tranny out so it's very plain where it is.  So it routes straight from the shifter, forward thru the hole (under the carpet) and curves around to the gear selector on the tranny.  The firewall by the booster is for a column shift.  More later.

Link to comment
Share on other sites

There may be another post answering this question but I was unable to find it. Feel free to post a link if you know where it is.

 

Scenario: I have an 89 eliminator, aw4 Trans on the floor. The cable was missing when I bought the Jeep. I purchased a shift cable with the length of 57".

 

Question: Does anyone know (possibly have pictures) the routing of this cable? It doesn't seem long enough to route through the firewall near the brake booster like I have seen.

 

http://comancheclub.com/topic/50405-aw4-floor-shifter-cable-routing/

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...