Newton Posted March 17, 2016 Share Posted March 17, 2016 none of my dash lights are working and i hate to believe that all the bulbas are bad did a little research and it was said that there is a ground under the driver side above the hood release knob didnt see and screw but i saw this black wire I'm guessing thats the ground if possible can someone post a picture as to where its suppose to go.. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 17, 2016 Share Posted March 17, 2016 Read these. It's in there................ http://comancheclub.com/topic/48463-cruisers-mostly-renix-tips/ Link to comment Share on other sites More sharing options...
Newton Posted March 17, 2016 Author Share Posted March 17, 2016 Read these. It's in there................ http://comancheclub.com/topic/48463-cruisers-mostly-renix-tips/ Read these. It's in there................ http://comancheclub.com/topic/48463-cruisers-mostly-renix-tips/ thanks hornbrod.. Link to comment Share on other sites More sharing options...
Eagle Posted March 18, 2016 Share Posted March 18, 2016 The wire in that photo does not look at all like a factory wire or a factory wire terminal. Link to comment Share on other sites More sharing options...
Newton Posted March 18, 2016 Author Share Posted March 18, 2016 The wire in that photo does not look at all like a factory wire or a factory wire terminal. :dunno: it goes directly into harness doesnt looked spliced or anything looks factory to me..but hey what do i know..don't even know what a factory one looks like ...hehe Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 18, 2016 Share Posted March 18, 2016 It's factory. Don't worry about it............ Link to comment Share on other sites More sharing options...
Newton Posted March 18, 2016 Author Share Posted March 18, 2016 I hope so ..grounded it but still no lights on dash though checked all fuse under dash and everything looked good until i noticed every fuse had power even though the key wasnt in the ignition then all of a sudden no power to the 2 fuse shown in the picture even though i tested them a second ago and they were fine now no power is going to them don't know WTH is going on..any ideas? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now