drcomanche Posted February 29, 2016 Share Posted February 29, 2016 Redeeming its name as Frankenstein, the stars have aligned(job promotion+ lack of sale interest= rebuild) and I am going to try to bring this one back from the grave. As I found out last year, the Comanche has some significant frame rail rot that must be addressed. I am looking to kind of test the waters and see if anyone anywhere near to me(I'm willing to drive to pick this up) has a roller or a junker with a decent frame that I could rebuild on. It doesn't need to run, or even have all the parts. I live in Lusby, MD 20657 and would need to be able to get it here to a friends garage to break down my truck and swap the stuff over, so it at least needs wheels. Link to comment Share on other sites More sharing options...
Pete M Posted February 29, 2016 Share Posted February 29, 2016 it's a uniframe construction, so you won't be able to buy just a frame. you need a whole truck. :thumbsup: or just repair the one you have if you are skilled with a welder. Link to comment Share on other sites More sharing options...
drcomanche Posted February 29, 2016 Author Share Posted February 29, 2016 That's what I meant to say. I would need the forward unibody+rear frame of the truck at the least(I won't be needing the actual bed, fenders, hood, doors, interior, etc.). And I am far from a skilled welder but I feel as though this is beyond just a welding repair with how far spread it is. Link to comment Share on other sites More sharing options...
Recommended Posts