ComancheFan Posted January 4, 2016 Share Posted January 4, 2016 So I picked up a set of bucket seats today out of a 2 door XJ not sure what year it was but it did have power windows if that narrows it down any. Anyway i'm looking to install them into my 1988 MJ that currently has a bench seat in it and i'm wondering how I would go about doing so. Do I use the bracket off my bench seat and cut the bracket off the bucket seat and weld them together? I would also like to find a console that will fit. Dose it matter if the console is on a manual or a automatic? Also what year XJ will be a direct fit. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted January 5, 2016 Share Posted January 5, 2016 http://comancheclub.com/topic/7656-making-xj-buckets-work-in-a-mj/ Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2016 Share Posted January 5, 2016 Cheyenne's link will set you up as far as the seats go. As for the center console, any one out of an 84- mid 96 will work in the truck (not sure of the 2nd generation XJ center consoles) so it's really just a matter of picking a color you like and putting it in. Make sure to grab the brackets that hold the center console to the floor to keep it from wiggling around when you push against it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now