snakedoc67 Posted March 27, 2015 Posted March 27, 2015 Taken from an 88 with 2.5, is this what you are looking for? More pics at:
jimoshel Posted March 28, 2015 Author Posted March 28, 2015 Take a straight edge and lay it across the pulley. If the center hub is 7/16-3/8 inch lower, then it's what I need.
HOrnbrod Posted March 29, 2015 Posted March 29, 2015 Jim, if you can't find a used pulley, here's one on Ebay HERE. NOS, good price, and free shipping too. This is correct for your 87 2.5.
jimoshel Posted March 29, 2015 Author Posted March 29, 2015 I 'll check it out. I found a couple sites on EBay that listed one but when I went to check out, all they showed was for the 4.0
jimoshel Posted March 29, 2015 Author Posted March 29, 2015 They had two so I ordered them both. Thanks guy. :thumbsup: :thumbsup:
jimoshel Posted May 4, 2015 Author Posted May 4, 2015 Working GRATE!! Got one on the DD, that needed it. Saving the other for when needed. Or if somebody needs it.
Recommended Posts