Crash Posted February 22, 2015 Posted February 22, 2015 Stuff I want: Renix full gauge cluster - Functional, decent shape. Rear bumper for MJ, with brackets Adjustable UCA's Non-spindle knuckles (prefer later model), maybe with good UB's and stub shafts? Possibly calipers for these as well? Renix ones may be accepted also, are the calipers the same for the spindles and renix 4wd non-spindle knuckles? Late model XJ manual front 4 door panels and manual regulators. MJ headliner and interior pieces. Lower on the list, since funds are tight - 4WD AX-15 (prefer ext slave), NV3500/50, and matching T-case.
87sparTruck Posted February 23, 2015 Posted February 23, 2015 I have a headliner. Where are you located?
MuddFoot Posted February 23, 2015 Posted February 23, 2015 i have 2 doors with door panels cheap if your in fl
Crash Posted February 24, 2015 Author Posted February 24, 2015 I have a headliner. Where are you located? Central Coast, CA Zip is 93444 i have 2 doors with door panels cheap if your in fl Since you are far, I do not need complete doors. I need 97-up XJ manual window door panels, manual regulators, and the window isolator inserts that connect the window to the regulator.
DirtyJeepGuy Posted February 27, 2015 Posted February 27, 2015 I have a steel horse rear tube bumper for the MJ if interested.
Crash Posted February 28, 2015 Author Posted February 28, 2015 I have a steel horse rear tube bumper for the MJ if interested. Pics, price?
Crash Posted March 1, 2015 Author Posted March 1, 2015 Also, if reasonably priced.. I would be interested in the rear taillight harness/connectors. This was all semi hacked when the utility bed was installed. Otherwise, I guess I could pull the one from my other project.
Crash Posted March 2, 2015 Author Posted March 2, 2015 Also need speedo cable, currently 2WD but wills wap to 4WD at some point. Not sure of the difference other than maybe length.
Recommended Posts