wombat Posted January 30, 2015 Share Posted January 30, 2015 As some of yall know from before, I have an 86 2wd 4speed. I had issues keeping it running and its not really what i want as a truck anyway. So I bought a 98 xj trail rig that had been rolled. I want to swap in the motor and drive train, but I am not interested in swapping in the new interior... I like my bench seat and old style interior. putting the drive train in is not an issue but can i make one harness or the other work with my factory dash? if the newer dash is needed to make everything work I guess thats what i'll do. The xj currently has an auto, but i'm not interested in keeping that. I'll find an AX15 eventually so will any other modifications needed to wiring for that? and lastly, does anyone want my oldmotor and tranny? LOL thanks guys. Link to comment Share on other sites More sharing options...
richasco Posted January 31, 2015 Share Posted January 31, 2015 I think the easiest thing to do would be to grab the engine and dash harnesses from a '96. I am currently in the middle of putting a 2000 4.0l/aw4/231 into my '86. The '96 harness and dash drop right in. There was only one bracket on the pax fender that I had to remove. I am also using the '96 steering column and brake pedal as well. You could just swap out your dash harness vs. the entire dash, but you will need a cluster that will work with the obd2 computer. Also putting in the aw4 and then swapping it out for a manual will probably be more work than it is worth. I would put the ax15 in from the start. Link to comment Share on other sites More sharing options...
wombat Posted January 31, 2015 Author Share Posted January 31, 2015 yea i do not plan to put the aw4 in all. Link to comment Share on other sites More sharing options...
wombat Posted February 1, 2015 Author Share Posted February 1, 2015 been looking into this more.. seems it might actualy be easier to do the whole swap... Link to comment Share on other sites More sharing options...
Motorcharge Posted February 1, 2015 Share Posted February 1, 2015 96+ are your only real options for that drivetrain. 96 is the only way you're going to get the old style interior because it was the only pre-97 year to use OBDII. Like richasco said, the dash from a 96 will bolt directly in more or less and work with a 97 drivetrain while keeping the older style looks. On the other hand you're going to have to mod the firewall quite a bit to get the 4.0 in anyway so you might as well swap the interior while you're at it. Link to comment Share on other sites More sharing options...
richasco Posted February 2, 2015 Share Posted February 2, 2015 The firewall mod to fit the 4.0l in an '86 is way over blown. It can be done in 10 seconds with any hammer. The area that needs to be moved is only 6" high by 2" wide and 1" deep. Link to comment Share on other sites More sharing options...
wombat Posted February 23, 2015 Author Share Posted February 23, 2015 I'm not a purest by any means when it comes to my MJ.. I simply want the quickest and easiest way to got the 4.0 swapped in and running without having to go through all the trouble of the dash swap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now