hackedmj Posted November 10, 2014 Posted November 10, 2014 looking for a cab back and glass. Need from just below the lower body line to across the roof. I'm in east Tn. needs to be within a reasonable driving distance. thanks guys
snakedoc67 Posted November 10, 2014 Posted November 10, 2014 I have a back that can be cut out of an 88 parts truck with the single window in NE.
hackedmj Posted November 12, 2014 Author Posted November 12, 2014 I have a back that can be cut out of an 88 parts truck with the single window in NE. I would like to find one at least in the southeast area but thanks any way.
ScottJeep Posted January 14, 2015 Posted January 14, 2015 Rusty's Pick A Part - Marion NC - supposedly has an MJ. Been trying for weeks to get pictures. 919-552-7228 - Number ( near raleigh, nc if my notes are correct ) 89 MJ no motor parting out.
hackedmj Posted January 16, 2015 Author Posted January 16, 2015 Rusty's Pick A Part - Marion NC - supposedly has an MJ. Been trying for weeks to get pictures. 919-552-7228 - Number ( near raleigh, nc if my notes are correct ) 89 MJ no motor parting out. I'll give them a check. The problem I'm having with Pullaparts, They won't allow you to use anything that throws sparks or uses a flame and they have no electric outlets for a sawzall
87sparTruck Posted January 16, 2015 Posted January 16, 2015 I have one I cut like that, but its cut like 6 inches below the window and I'm up Northeast.
Dadinator Posted January 18, 2015 Posted January 18, 2015 If this is a common issue with you, I would suggest a battery powered sawzall. I have a 19.2v kit from craftsman that included a drill, sawzall and a couple of others. Use them all the time.
ScottJeep Posted January 21, 2015 Posted January 21, 2015 I needed that ^^^^ again yesterday with the roll-bar ordeal... and last weeks "I only want the bottom of the bench seat for the brackets" fun.
Recommended Posts