comanchematt Posted July 13, 2014 Share Posted July 13, 2014 1988 Comanche. When I got it had no brake pedal. Replaced master and booster. Then brakes started dragging so I adjusted the rod in between them. Have a pedal now. Also have bleed them numerous times. Then brakes are now dragging after about a 15 miles trip. So I replaced front rotors calipers hoses and pads. Still dragging. I'm stumped! Any ideas Link to comment Share on other sites More sharing options...
Jeep Driver Posted July 13, 2014 Share Posted July 13, 2014 Your pads rest on the slides, there are indentions in the slides that do not allow the pads to relax. You will need to fill the indentions with weld and then resurface. Link to comment Share on other sites More sharing options...
Incommando Posted July 14, 2014 Share Posted July 14, 2014 Replaced the master cyl. with a new, rebuilt, or used unit? Link to comment Share on other sites More sharing options...
comanchematt Posted July 14, 2014 Author Share Posted July 14, 2014 Finally found the problem its was a combination of Mc. Was adjusted to tight and one of the caliper was sticky. Thanks for the input! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now