coyote kid Posted June 22, 2014 Share Posted June 22, 2014 i need to know if i can put a 2wd output housing off my 2wd ax4 on my 4x4 ax5 i don't want to convert the whole truck to 4x4 just yet i have both transmissions out and they look identical the only issue i see is that the 2wd output shaft is way longer so how hard is it to swap output shafts? thanks btw the reason i am not doing a 4x4 swap yet is the tcase that was on the ax5 is shot and i don't have a good front end yet ... or the money for either part Link to comment Share on other sites More sharing options...
Jeep Driver Posted June 22, 2014 Share Posted June 22, 2014 The short answer is..........No. Link to comment Share on other sites More sharing options...
coyote kid Posted June 22, 2014 Author Share Posted June 22, 2014 so the only way to get the 4x4 ax5 to work is to do the full swap Link to comment Share on other sites More sharing options...
benjy_26 Posted June 22, 2014 Share Posted June 22, 2014 Or just throw in the tranny/t-case combo and not hook up the front shaft. Link to comment Share on other sites More sharing options...
coyote kid Posted June 22, 2014 Author Share Posted June 22, 2014 i could but the chain in the tcase is way stretched Link to comment Share on other sites More sharing options...
Jeep Driver Posted June 22, 2014 Share Posted June 22, 2014 Go to the PnP and get a chain..........$12 or so......I'm guessing. RVT is $6 I quart trans fluid is $5 You and down the road for $23 Link to comment Share on other sites More sharing options...
coyote kid Posted June 22, 2014 Author Share Posted June 22, 2014 last time i was there they did not have anything with a np207 and that was last week does the chain only drive the front ? if so could i just remove it and run it like that till i get a new tcase ? i decided i want to go with the np231 when i finaly do the 4x4 swap Link to comment Share on other sites More sharing options...
Jeep Driver Posted June 22, 2014 Share Posted June 22, 2014 TC at our PnP is $75, go grab you a good one. Link to comment Share on other sites More sharing options...
benjy_26 Posted June 22, 2014 Share Posted June 22, 2014 ^^ This. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now