Dando Posted March 4, 2014 Share Posted March 4, 2014 So I just finished up wiring my existing fogs, added a switch, relay, and new wiring completely. After attempting to turn them on I checked the bulbs and they were not there. Is this the wiring connection or is this silver part a part of the bulb that I still have to remove? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted March 4, 2014 Share Posted March 4, 2014 What you have are r.ol. Lights I can take my nos one apart to find out about what bulb is in it give me gotten minutes I'll be back Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted March 4, 2014 Share Posted March 4, 2014 It's an h3 12v 55 watt bulb remove the reflective lens and mounted on the backside is a wire clip that needs to be squeezed together to remove the base of the bulb. Reverse for installation don't touch the glass bulb with your hands it will prematurely wear the bulb out . While your at it sand an paint the reflective piece withe a light silver high temp paint Link to comment Share on other sites More sharing options...
Dando Posted March 4, 2014 Author Share Posted March 4, 2014 Awesome, thanks a lot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now