Comanche Joe Posted April 11, 2007 Share Posted April 11, 2007 And also where to get them??? I know a local boneyard may be the answer, but I was just wondering if there were any other options... What was your cost associated with this update??? Joe Link to comment Share on other sites More sharing options...
JeepcoMJ Posted April 11, 2007 Share Posted April 11, 2007 front header panel, all the ligths for it, fenders if you are going with new front bumper and flares, bumper in that case too. and the lighting harness as well. you will have to wire it to your stock connector. Link to comment Share on other sites More sharing options...
ChiefJosh Posted April 11, 2007 Share Posted April 11, 2007 I just finished this on my 88 MJ, I can give you a wiring "diagram" to save you the hassle I had of trying to sort out all of those wires. There's 10 wires on the new harness, and like 6 or 7 on the old one. So far, everything seems to work..... Link to comment Share on other sites More sharing options...
Car RamRod Posted April 16, 2007 Share Posted April 16, 2007 so lets say you're using an aftermarket bumper? you'd only need the header panel, grill and lights? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted April 16, 2007 Share Posted April 16, 2007 yup, and then you'd either trim the fenders to match the header, or just build the bumper over the fenders. Link to comment Share on other sites More sharing options...
Car RamRod Posted April 17, 2007 Share Posted April 17, 2007 oh nice, I might look into doing that. It looks sweet. Link to comment Share on other sites More sharing options...
comancheon33 Posted April 17, 2007 Share Posted April 17, 2007 I would be interested in the wiring diagram that you have. I am getting ready to do this swap. Once I find a rf fender. Link to comment Share on other sites More sharing options...
SeanAK Posted April 18, 2007 Share Posted April 18, 2007 I would also be interested in the diagram, I have allready started this swap, thanks Link to comment Share on other sites More sharing options...
Crash_AF Posted April 18, 2007 Share Posted April 18, 2007 Which wiring diagram? I have an 89 and 99 FSM and here are the headlight harness colors: 1999 Connector C106 driver's side main harness to headlight harness looking at the back of the headlight side connector with the tab on top Pin 1 is on the right top pin 8 is on the right bottom: 1 empty 2 red - Left headlight low beam power 3 light green - Left turn signal power 4 black - Right headlight park/turn light ground 5 empty 6 red/orange - Right headlight low beam power 7 brown - Left parking light power 8 light blue (w/ fog lights only) - Fog light power (to bulb) 9 violet - Left headlight high beam power 10 tan - Right parking light power 11 black - Left headlight park/turn light ground 12 red (w/ fog lights only) - Fog light power out (to relay) 13 violet/red - Right headlight high beam power 14 dark green/yellow - Right turn signal power 1989 headlight wiring. Main harness to headlight harness connector on driver's side. Looking at the back of the connector on the headlight harness side with the 'ears' on the bottom, Pin 1 is left top and pin 6 is right top. 1 empty 2 white - headlight high beam power 3 grey - left turn signal power 4 dark blue - parking light power 5 black - ground 6 red (w/ fog lights only) - fog lamp relay power in 7 light green - headlight low beam power 8 brown - right turn signal power 9 empty 10 light green - (w/ fog lights only) to fog light relay signal power Hope this helps. Later, Joe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now