Echostrike Posted June 6, 2013 Share Posted June 6, 2013 When I bought the truck I got no console. The shifter is literally coming out of a hole in the floor--it is very sad. I'm looking for the whole enchilada, such as what is seen in the pic on this other wanted thread: http://comancheclub.com/topic/19781-wanted-manual-4wd-center-console/ Thanks! Link to comment Share on other sites More sharing options...
oldseddie Posted June 12, 2013 Share Posted June 12, 2013 Full or short? I may have a full one. Link to comment Share on other sites More sharing options...
Echostrike Posted June 18, 2013 Author Share Posted June 18, 2013 Do you have a pic, i could possibly use it! Thanks! Link to comment Share on other sites More sharing options...
1987Comanche Posted June 23, 2013 Share Posted June 23, 2013 I have my old one from when I converted to buckets & a center console. I think I have a 4WD insert as well (currently has 2WD block off plate). No shifter boot or retainer ring though. It's grey. If you have any interest LMK. Link to comment Share on other sites More sharing options...
GirsMJ86 Posted June 23, 2013 Share Posted June 23, 2013 Just FYI, any 2wd version will work as well. Same with auto consoles. All the parts just pop out and snap in. And FWIW, I just bought a new boot but turned out I didn't need it since there was nothing wrong with my old one. I could let it go for what I paid ($10) plus shipping or I could let my used one go for half that. LMK if ya need one. Either way I only have the boot though, no retainer ring since the one I had was busted, ended up using double sided automotive foam tape to hold the boot in place. Link to comment Share on other sites More sharing options...
Recommended Posts