wrpoole Posted April 29, 2013 Share Posted April 29, 2013 Start as a a 2wd jeep Comanche Do Link to comment Share on other sites More sharing options...
wrpoole Posted April 29, 2013 Author Share Posted April 29, 2013 Sent before finished Do 3 inch front springs and 2 inch blocks in the front For the rear do soa Do aw4 and d30 front and an 8.8 LSD disc brake rear Link to comment Share on other sites More sharing options...
wrpoole Posted April 29, 2013 Author Share Posted April 29, 2013 End on 35 inch tires and it fenders with custom flat bed Link to comment Share on other sites More sharing options...
CoryMJ89 Posted April 29, 2013 Share Posted April 29, 2013 I started as a 2wd and built tere with the 8.8 and Dana 30 with 35s it's a good start but I did a 8.5 inch lift coils with an soa u will be havin the stuffed tire look with that lift Link to comment Share on other sites More sharing options...
mnkyboy Posted April 29, 2013 Share Posted April 29, 2013 I started with 3" springs and 2" spacers with SOA. I ran it like that for a while then swapped the springs and spacers for 6.5" coils. Link to comment Share on other sites More sharing options...
wrpoole Posted April 29, 2013 Author Share Posted April 29, 2013 What did you run for control arms, trac bar and steering with this setup or bigger? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now