Blue88Comanche Posted February 24, 2013 Share Posted February 24, 2013 Today being a nice day outside I started working on installing my new Aussie locker. I am to the f...... Roll pin and I am stuck. Any advice? So far I have smashed my had hard enough to invoke mild nausea.. I have a pin punch set but it seems to be too short. Link to comment Share on other sites More sharing options...
mvusse Posted February 24, 2013 Share Posted February 24, 2013 I use a long screwdriver with the tip ground off. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted February 24, 2013 Author Share Posted February 24, 2013 Tried that, it's now broken off and stuck in the carrier, the pin is almost half way out I think and won't go any farther... I have just about had it with that carrier... My hopes to put in the limited slip carrier to limp it home also failed when the passenger side shaft bearing won't go in.. What's a good indicator that the bearing has killed? The drivers side went in without any issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now