starkizer Posted January 5, 2013 Share Posted January 5, 2013 I replaced my shocks approx 6 months ago and have had no problems. Now out of the blue I am getting a loud clunking noise going over even the smallest bumps and I am at a loss. I think the noise is coming from the front. Its an 89 Pioneer long bed 4x4 etc. I have Monroe SensaTrac shocks all around. Any ideas on how to stop the noise. I have ehard about some lithium greese or something you can spray on them, but I don't know! Thanks! Link to comment Share on other sites More sharing options...
Dadinator Posted January 5, 2013 Share Posted January 5, 2013 Check to make sure the bolts are tight on the shocks. One may be loose. If that's not it, check other areas in the front end to ensure that nothing else is loose. Link to comment Share on other sites More sharing options...
Goose Posted January 5, 2013 Share Posted January 5, 2013 Could possibly be your sway bar bushings Link to comment Share on other sites More sharing options...
Tom Tom Posted January 6, 2013 Share Posted January 6, 2013 Check the bottom bushing where the bar goes thru. I have had them disappear in the past. Link to comment Share on other sites More sharing options...
maddzz1 Posted January 6, 2013 Share Posted January 6, 2013 Check your trac bar at the frame bracket and the bracket itself. My trac bar was doing the same thing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now