Buckey Posted February 25, 2007 Share Posted February 25, 2007 How do I unplug the wire harness from the firewall??? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted February 25, 2007 Share Posted February 25, 2007 How do I unplug the wire harness from the firewall??? trial and error. don't cut anything unless you're certain you have to., and if you do, mark it. Link to comment Share on other sites More sharing options...
Buckey Posted February 25, 2007 Author Share Posted February 25, 2007 I don't wanna cut anything just want to change the wire harness and can't figure out how to diconect the plug at the firewall.I can't see any screws just a couple plastic clips is all. Link to comment Share on other sites More sharing options...
jbhill Posted February 25, 2007 Share Posted February 25, 2007 there is a bolt on the outside that you have to undo to get ti apart. Link to comment Share on other sites More sharing options...
Joop Posted February 25, 2007 Share Posted February 25, 2007 Deep in there between the 2 contacts is a little PITA screw, think you need a 1/4" socket to get it out (6mm was too small an 7mm too big, not so shure about those bolt-dimensions because i HATE everything nonmetric) I used the bitholder of an electric screwdriver mounted to a small ratchet to get it out Link to comment Share on other sites More sharing options...
hemi_comanche Posted February 25, 2007 Share Posted February 25, 2007 definately a 1/4 bolt, I just used a small socket with and extension and a small Universal joint and small ratchet handle. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted February 25, 2007 Share Posted February 25, 2007 why are you replacing the harness? just wondering. Link to comment Share on other sites More sharing options...
Buckey Posted February 25, 2007 Author Share Posted February 25, 2007 putting in 4 litre HO engine and the harness that is in there is all a rat nest of wires,and the ho harness is in better shape. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted February 25, 2007 Share Posted February 25, 2007 putting in 4 litre HO engine and the harness that is in there is all a rat nest of wires,and the ho harness is in better shape. ah. replacin the interior harness while you're at it? probably not a bad idea... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now