1bdmj Posted February 24, 2007 Share Posted February 24, 2007 on my comanche i was wondering if i can just take that rear proportioning valve over the rear end off. if not can someone give me a picture of the stock location that the lever is sopose to be in. Link to comment Share on other sites More sharing options...
razrwild Posted February 24, 2007 Share Posted February 24, 2007 what I did on mine was unscrew the brake line from the rear valve and screw it into the other line going to the rear splitter then I clipped and crushed the return line since my lines are mostly frozen in place. Link to comment Share on other sites More sharing options...
Duner Posted February 25, 2007 Share Posted February 25, 2007 After hauling my uncle's fire proof gun safe down to our ranch my rear load sensing valve decided to pretend it was still loaded leading to incredible brake performance. So my dad just disconnected the rod and pushed it up a bit for now. no problems and that was back in december. In the future we will eliminate completely as this truck is not really intended for hauling 700 lb loads. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now