Bullykatz Posted July 9, 2012 Share Posted July 9, 2012 Project's not going anywhere anytime soon so.... (4) 35x12.5x15 ProComp Xterrains with (4) Mickey Thompson Challenger forged aluminum wheels. 2 of the tires are mounted and balanced. These tires/wheels have never been wheeled so no cuts or road rash and the wheels are 5x5.5 15x10 Excellent tread on the tires but the wheels need little cleaning from sitting in the garage. The M/T wheels were made before the company was sold to Alcoa and are the real McCoy. Forged, not cast. The rig itself has a full width 8.8 axle which explains the 5x5.5 pattern on the wheels... A HD SYE from Bayou Geep, tranny and steering pump coolers, a GDI radiator, ford 5.0 injectors, and 7-8" of homebrew lift goodness... Buy it, throw an engine in it and beat the piss out of it... entire rolling project (w/blown engine) for $900 - no title $700 for tires and wheels pm or email Bullycatz@hotmail.com ps. Possibly willing to trade for military type rifles/pistols depending on what you have. Link to comment Share on other sites More sharing options...
Backdraft Posted July 9, 2012 Share Posted July 9, 2012 What's your avatar pic from? Link to comment Share on other sites More sharing options...
MCF90 Posted July 10, 2012 Share Posted July 10, 2012 What's your avatar pic from? Clockwork Orange, right? Matt Link to comment Share on other sites More sharing options...
jakeWI Posted July 10, 2012 Share Posted July 10, 2012 gears, lockers, what lift parts? Link to comment Share on other sites More sharing options...
Bullykatz Posted July 10, 2012 Author Share Posted July 10, 2012 gears, lockers, what lift parts? A few more details... out back is a full width 8.8 with 4.10's and the oem lim slip locker (traclok?) hung by Great lakes offroad custom Hd spring perches with grease-able extended shackles and a 9 leaf combo pack using Old man Emu/Waggy leafs... Pic is before the 8.8 swap (shims are gone) up front is a stock D30 on pro-Comp Arms with 4.5" coils with 2"poly spacers, RE adj trackbar and a Rustys steering conversion. The rear axle was angled to line up with a custom driveshaft running 1330 u-joints into the HD SYE/TC... separate steering pump and tranny oil coolers as well as the GDI rad and a mean green starter. Link to comment Share on other sites More sharing options...
MancheKid86 Posted July 29, 2012 Share Posted July 29, 2012 if you were closer id buy this so fast! :( Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.