Truckcom Posted June 4, 2012 Share Posted June 4, 2012 I have a parts comanche I keep across the street which, until now, has been driveable but apparently someone recently siphoned the fuel tank dry. When I went to start it, after a few attempts, I noticed no sound from the pump and checked to find no fuel at the rail. When I realized what had happened, I put 5 gallons of gas in the critter but still the pump is not running. The pump circuit is energized as far as the connection to the pump at the tank. I am guessing the pump may be stuck or damaged from running dry. Any quick fix suggestions? Link to comment Share on other sites More sharing options...
HOrnbrod Posted June 4, 2012 Share Posted June 4, 2012 The pump grounds to a stud behind the left tail lamp. Make sure the ground is clean and tight there then check for continuity between it and the fuel pump connector at the tank. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now