XXLMJ Posted February 19, 2012 Posted February 19, 2012 I'm trying to put in a new/used transfer case a 231 to replace my broken 231. And the new one's main shaft that goes into the transmission seems to be 1/4 of an inch longer. Is this possible, can i switch the 2?
XXLMJ Posted February 19, 2012 Author Posted February 19, 2012 Yup answered my own question there are 3 different type of output shafts
mvusse Posted February 19, 2012 Posted February 19, 2012 There are three different length input shafts, AND there are 21 spline and 23 spline ones. Also either during 94 or between the 94 and 95 production year they changed the cut of the gears as well as the width of the bearings, so old and new shafts will not interchange.
ParadiseMJ Posted February 20, 2012 Posted February 20, 2012 ....and there is a 231C, a 231D and 231J. Chevy, Dodge, Jeep
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now