ritzer Posted September 28, 2011 Share Posted September 28, 2011 Trying to figure out the size of my pilot bearing. Not sure of the diameter on the input shaft. Do I have to guess here or is there a common size? Rockauto lists like 5 different ones. Its an 86 Manual AX5 2WD. I am replacing my throwout bearing and was told to get one of these too. It is my DD and I don't want to pull it to get a mic on it then order it and put the trans on only to pull it again. Link to comment Share on other sites More sharing options...
fiatslug87 Posted September 28, 2011 Share Posted September 28, 2011 The Jeep PN for the V-6 pilot bushing is 83500786, is there a cross reference for it? Link to comment Share on other sites More sharing options...
ritzer Posted September 28, 2011 Author Share Posted September 28, 2011 Yes there is a cross-reference for a few of them with that P/N. But the sizes don't match up. These 2 are under Pilot Bearing. -Inside Dia: 0.673"; Outside Dia.: 1.055"; Length: .626" DORMAN Alternate/OEM Part Number(s): 14675, 3222723, 83500786, J3222723 -Width=.747"; Outside diameter=.8310"; Inside diameter=.5910IN SKF Alternate/OEM Part Number(s): 476574, 83500786 This is under Pilot Bushing -Bushing; Bore=0.592", Outer Diameter=0.829", Width=0.755" NATIONAL Warranty Information 12 months Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now