ritzer Posted August 2, 2011 Share Posted August 2, 2011 For a 2.8? They gave me the wrong one and I have no way to get any where to pick one up now that I pulled it. Link to comment Share on other sites More sharing options...
Automan2164 Posted August 2, 2011 Share Posted August 2, 2011 Can't say anyone close would have one... Have any buddies that would do some parts store runs for beer? Rob Link to comment Share on other sites More sharing options...
jimoshel Posted August 2, 2011 Share Posted August 2, 2011 RTV? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 2, 2011 Share Posted August 2, 2011 I don't have one, but may be able to help out later in the week. didn't realize you're so close...i'm in the wind lake area, hail from burlington. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 2, 2011 Share Posted August 2, 2011 you have it for sale on craigslist, by any chance? Link to comment Share on other sites More sharing options...
Automan2164 Posted August 2, 2011 Share Posted August 2, 2011 you have it for sale on craigslist, by any chance? He bought it from the $700 guy. Rob Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 2, 2011 Share Posted August 2, 2011 gotcha. i've been after that truck for years...old owner used to go to a church on 12 north of abel's corners, always saw it. left tons of cards/messages. I have all the parts to make it 4x4 for you ;) Link to comment Share on other sites More sharing options...
ritzer Posted August 2, 2011 Author Share Posted August 2, 2011 That guy may never have taken it off CL. After this weekend I sure feel like it should be back on there though. Went through everything I could over the weekend. The trans was out for the rear main seal. The engine got torn into, for the sake of the valve cover gaskets. That vacuum system is another story huh? My VW was easier than that. My issue was the gasket they gave me was a one piece. It had two half circles on it instead of just one and the separate piece that goes by the rear bearing cap. My mistake was not looking at it until the last minute. I snipped it off and tried some JB weld to fill the void since the stuff just cracks off when you need to get it out to put the new gasket in. I wish I could have gotten through something without riggin something up. I just never have good luck. At least the exhaust bolts came loose. Burlington huh? Well your welcome to come take a look at it if you like. I could use some encouragement.. Link to comment Share on other sites More sharing options...
ritzer Posted August 2, 2011 Author Share Posted August 2, 2011 Nah all my friends complain when I ask for rides. I rode my bike a few miles today to check on one but I blacked out at the counter and can't remember if I ordered it or not.. True story Link to comment Share on other sites More sharing options...
ritzer Posted August 3, 2011 Author Share Posted August 3, 2011 Found one, its all buttoned up, just taking a break. Put some oil in it and hope it doesn't leak in the morning when I start it up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now