JeffN Posted January 27, 2011 Share Posted January 27, 2011 I just pulled the transmission out of my 87 jeep comanche 4L. This will be the 3rd time I have had to pull it because of the TO bearing leaking. Does the AX5 have a sleeve the bearing rides on? There is not one on mine and it seems it would allow it to wobble. The pin and retaining clip were intact. Quote Link to comment Share on other sites More sharing options...
Geonovast Posted January 27, 2011 Share Posted January 27, 2011 No, internal slaves do not have a sleeve on the bearing retainer. There is an alignment peg on the retainer that it has to be sitting on though, or it'll make a nasty noise when you push in the clutch. Quote Link to comment Share on other sites More sharing options...
freakjeep93 Posted January 27, 2011 Share Posted January 27, 2011 a 4L mj should have a ax 15 not a ax5 Quote Link to comment Share on other sites More sharing options...
Geonovast Posted January 27, 2011 Share Posted January 27, 2011 a 4L mj should have a ax 15 not a ax5 An 87 should have a BA 10/5 not an AX-15. Quote Link to comment Share on other sites More sharing options...
freakjeep93 Posted January 27, 2011 Share Posted January 27, 2011 unless someone upgraded to a ax 15 :wrench: but yes i didnt notice that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.