91coMANche Posted December 15, 2010 Share Posted December 15, 2010 I desperately need to find a way to add intermittent wipers. I can find another MJ or XJ with the proper steering column stalk. What else is involved in getting it to run timed instead of constantly. Link to comment Share on other sites More sharing options...
kyleag89 Posted December 15, 2010 Share Posted December 15, 2010 There is a black box you need that is located under the DS dash where your knees would be. All you do is simply unplug the wire harness from the column and plug this box in. Link to comment Share on other sites More sharing options...
1987Comanche Posted December 15, 2010 Share Posted December 15, 2010 You also have to tear the column down and replace the multifunction switch. In the case of my '87 someone had replaced the switch with a GM delay and cruise unit but never put the timer module (black box) under the dash. They got 90% of the way there and never finished it :dunno: Link to comment Share on other sites More sharing options...
91coMANche Posted December 15, 2010 Author Share Posted December 15, 2010 So its all plug and play under the dash and then I rebuild the column with the delay stalk. Correct? How tough is it to pull out the column? I assume XJ parts work just as well as MJ? Link to comment Share on other sites More sharing options...
kyleag89 Posted December 15, 2010 Share Posted December 15, 2010 You can swap in a XJ column or replace the stalk in your column. Link to comment Share on other sites More sharing options...
91coMANche Posted December 15, 2010 Author Share Posted December 15, 2010 Does this stalk look right? http://www.teamgrandwagoneer.com/parts/ ... /1134.html Link to comment Share on other sites More sharing options...
1987Comanche Posted December 16, 2010 Share Posted December 16, 2010 Yes, that's a standard GM stalk. Pretty much any '80s GM car will work as a donor. The stalk just pulls out of the switch and then you have to disassemble the column to remove the switch. It's probably as much work to replace the switch as it is to swap the column...just depends on what you have available. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now