just got 8.8 today what adapter ????

[TooTall]

just bought my 8.8 today moser shafts and 456.1 gears,detroit locker nice 300bks!!!!! :clapping: what adapter do i need to the rear axle ....I'm doing a spring over thanks..

[dakineJ]

Nice score ! I think you need a 1310 to 1330 adaptor or a combo u-joint? Spicer would be a good source.

[88pioneer]

http://www.mountainoffroad.com/_e/Ford_ ... _YJ_TJ.htm

 

theres one cheaper but i don't remember the site

[TooTall]

thanks looks like i can get the adapter from napa its cheaper and local and either the spring plates and u bolts etc from mad offroad or moreoffroad but might fab up my own! :nuts:

[64 Cheyenne]

http://www.mountainoffroad.com/_e/Ford_8_8_rear_axle_Install_Kit/product/221379/Yoke_for_Ford_8_8_into_Jeep_XJ_YJ_TJ.htm

 

theres one cheaper but i don't remember the site

 

 

http://www.alljeep.com/oscommerce/produ ... _id=167208

 

On mine I used the spring plates from the Exploder, cut the shock mounts off the plates and welded them to the axle for new shock mount location.

Suggest finding U bolts locally. Very common items. Would have cost me more than the U bolts were worth to have them shipped.

[Dave Stark]

This is what i used:

 

http://www.knowwhere2jeep.com/catalog/p ... s_id=11443

 

Complete kit to install, i ordered mine without the diff cover since it is not a girdle cover...