shipp08 Posted June 14, 2010 Share Posted June 14, 2010 my tail light is really bright and the blinker will not work. however i take the fuze out and now my blinkers work but i have no tail lights. i have looked at the harness and i can find anything wrong. and when i put a fuze back in i have the same problem. the blinker and tail light on passenger side work. i can't find any shorts or anything. any help is much appreciated. thanks Link to comment Share on other sites More sharing options...
Pete M Posted June 14, 2010 Share Posted June 14, 2010 have you checked inside the bulb sockets for corrosion? Link to comment Share on other sites More sharing options...
gl1200aman Posted June 15, 2010 Share Posted June 15, 2010 Check the simplest possibility, did you put the bulb in wrong? One of the side nipples that hold the bulb in is further down than the other. If you have it 180 off the tail light is bright (brake light). Link to comment Share on other sites More sharing options...
shipp08 Posted June 15, 2010 Author Share Posted June 15, 2010 i have looked in the sockets. i think there might be omething wrong with them. i did however get the tail lights and blinker problem fixed. however now the hazards no longer work. and the left blinker light in the dash stays on. doesnt blink just is on and i can get it off. and my two running lights in the back don't work at all. thanks for all the help. Link to comment Share on other sites More sharing options...
Automan2164 Posted June 15, 2010 Share Posted June 15, 2010 Is there a trailer harness now, or ever been one on the truck? Rob L. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now