indysport440 Posted March 31, 2010 Share Posted March 31, 2010 my wiper switch is broken and i was wondering if i could use a universal switch on the dash or something. if u have any ideas or have done something similar let me know thanks. Link to comment Share on other sites More sharing options...
jimoshel Posted March 31, 2010 Share Posted March 31, 2010 As plentiful as they are, why don't you just get one from a XJ and replace it? Link to comment Share on other sites More sharing options...
Squeegy410 Posted March 31, 2010 Share Posted March 31, 2010 i have done something similar. the relay is bad in mine and i didnt wanna take the tilt column a part (its a pain) so i tested all the wires in hooking up to the wiper motor and figured out what they did, then i put robbers on them (so i didnt destroy the connection to the original switch) and ran wires back into my cab. i ran those to a three way switch (up for low sped, down for high speed, and middle for off) and a small push button (wiper fluid. i mounted those into a small plastic interior piece from an old car (it happened to match my interior) and viola :D now i just flip a switch for wipers and push a button for fluid. only problem is i have to turn the wipers off when their at the bottom or they sit in the middle of my windsheild, but its still better than nothing. one day i will tear into the tilt column and fix it right, but for now it works fine :thumbsup: Link to comment Share on other sites More sharing options...
JeepcoMJ Posted March 31, 2010 Share Posted March 31, 2010 what switch is bad? the actual stalk, or the switch inside? do you have intermittent wipers? if so, did you remove the wiper delay module and then test them? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now