jmderyke Posted November 20, 2009 Share Posted November 20, 2009 I have the new process 207 and it has a crack at the rear housing near output shaft seal. I can't find a new rear housing anywhere, does anyone know where i could find one? will they interchange with any other housings? Link to comment Share on other sites More sharing options...
Pete M Posted November 21, 2009 Share Posted November 21, 2009 do you know why it cracked? You might have more damage than just the output housing. Link to comment Share on other sites More sharing options...
Geonovast Posted November 21, 2009 Share Posted November 21, 2009 I'd say it's time to upgrade to a 231. They're everywhere, and probably be about the same amount of money as fixing your 207. And even if you fixed it... you'd still have a 207. Link to comment Share on other sites More sharing options...
jmderyke Posted November 21, 2009 Author Share Posted November 21, 2009 I just bought the truck the 4wd works great,...... but its still a crack about 1/4" long at the output shaft seal not sure what caused(maybe a bearing or u joint??) who knows how long its been like that i just seen it when doing some other work. Does the 231 have the same spline count? And do i have to pull it from a manual transmission since i have a manual transmission? Link to comment Share on other sites More sharing options...
Geonovast Posted November 21, 2009 Share Posted November 21, 2009 A 231 from behind an AX-4/5 up to IIRC 98 should have the same length input and spline count. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now