creekscout Posted August 19, 2009 Share Posted August 19, 2009 I have to give you all the details first, we removed the tank to take the bed off in order to clean and paint the undercarriage as well as to work on the bed to get the entire truck painted. While the tank was out I decided to put in a new fuel pump to save a tougher job later on. Well now that we are ready to take it to the painter we sat the bed back on and temporarily hung the tank back under using bungies just so we could start it and move it around. The mj will not start now like this and I cannot figure out why. When I jump power right to pump I can hear it run, but when I plug it in and try to start it I can not hear it. Is there a way I can check to see if I am getting a good ground? Sorry for the long post. Link to comment Share on other sites More sharing options...
Geonovast Posted August 19, 2009 Share Posted August 19, 2009 You need to reattach the ground in the back for the taillights. Pump grounds through there. Link to comment Share on other sites More sharing options...
Oizarod115 Posted August 20, 2009 Share Posted August 20, 2009 :thumbsup: :agree: Link to comment Share on other sites More sharing options...
creekscout Posted August 20, 2009 Author Share Posted August 20, 2009 Yep, that was the problem, found the ground wire back at the taillights and fastened it back and the pump works. Thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now