creekscout

productive day today, I now have the wiper delay working, cruise control is working, and I have located where the chime module should be but have not found a module after looking thru 2 junkyards today. If anyone can give me a part # for the chime module I will try to find a new one. As far as the headlight sentinel, I think maybe it was a '91 cherokee laredo that I had that I know had the headlight sentinel that had me thinking the mj had one, so I think now that it did not have that option. The main problem seemed like some of the contacts for the above items were corroded a bit and after working the connectors around some all these things are now functional. Thank you everyone for your advice.

Ok thanks for all the great info, tomorrow I will check for all those things, but I already know that blue chime module is not there. The next problem will be finding the right parts that I need, new or scrapyard.

I do believe there is one or two empty connectors under the dash but I would need to figure out what goes in them. I will look tomorrow and try to take some pics and maybe someone can identify what it is. Thanks for your replies.

This is going to be long to explain. I am trying to find what is missing[yearsagowhen my son was using the mj he removed something I think because he did not want the chimes working] now I would like to fix what ever that was. So here is what all does not work anymore, chimes, cruise control, wiper delay, headlight delay. I appreciate any suggestions on what to check. It is a '92 4x4 auto 4.0l longbed.

OK I jumped the nss and it started so that is what I have to work on. On my mj the end of the connector that needed to be jumped was the male end which goes to the switch, the one picture of the jumped connector showed the female jumped which on mine goes to the transmission.Thanks everyone for your replies, don't come on this site too much anymore but it is a great help when more knowledge than I possess is needed.

where is it NSS located? my mj is a column mounted automatic. So if it is the nss then I can not even jump across the solenoid to start it? No it will not start in neutral either.

my 92 comanche wii not start. I had trouble getting it into park today and when I finally got it into park I shut it off. Later I went to start it and it will not attempt to start, meaning it seems like the starter is not getting energized. Any ideas?

Don, that is exactly the solution I am looking for. Will the fan still function with the temperature as well as with the switch? Will there be any problems with the CEL coming on. This would only be an on/off switch not a three way right?

How do I test my sensor while it is still in the thermostat housing?

When you replace the sensor in the thermostat housing can I use teflon tape or will that affect the grounding of the sensor?

I would like to know where the temp sensor is located for the electric fan in my 92 mj with a 4.0L. I know there is a sending unit in the thermostat housing but I do not know if that is for the elec. fan or temp gauge or both. Also I would like to know what temp they are set to turn on the fan. At 220 my fan does still not come on yet it does come on with the defrost & a/c.

I want to replace the shocks on my 92 metric ton mj with 1 3/4" front lift, stock rear. I would like to know if the metric ton had the same rear shocks as standard trucks? Also what shock size do I need for the front if the distance between the axle mount and fenderwell hole is 20"? Thank You for any help

the crossmember exhaust hanger has two of the flange bolts pressed into it, at least on the one I got from the dealer to replace my rusted apart hanger.

Just found out that OS 34308R is the oilpan gasket. I do not want to have to drop the pan, but that makes it sound like I have to.

I already have the balancer off, I just want to wait before removing the timing cover to make sure I don't mess up the oilpan gasket before I know where to cut the gasket. I figure maybe the gasket kit will have instructions. I can't figure out what OS 34308R is, and what is its use. I am also having trouble finding another timing cover, dealership wants $100 for a new one but it is not readily available and will take at least 2 weeks to get. Checked on ebay and there are none listed on there that match my casting #53020232. Seems like '92 was a single year model because on the parts listing it is the only year that requires OS 34308r. Also I will likely be replacing my timing gear set as well.