freakjeep93 Posted July 24, 2009 Share Posted July 24, 2009 hey guys I'm doing a 4wd conversion on my mj but i don't have a donor vehicle i bought a dana 30 front end and I'm wondering how to hook up what i think is a vacume disconect. its a hookup for some tipe of hose to the right of the diff when you are behind it. what i am wondering is either how to hook it up so that my front drive works or how to make my front end conected all the time. plese help! Link to comment Share on other sites More sharing options...
Pete M Posted July 24, 2009 Share Posted July 24, 2009 -Pull the cover on the CAD (central axle disconnect) -move collar over to lock axle shaft -use one of the plethora of ideas for keeping it there -re-install the cover -remove the rats nest of vacuum lines and cap the start point Done. :D Your Jeep will be set up just like the rest of modern Jeeps. 4wd is now available any time you pull the lever. No more problematic CAD. Link to comment Share on other sites More sharing options...
freakjeep93 Posted July 24, 2009 Author Share Posted July 24, 2009 the cad is what i was talking about right? Link to comment Share on other sites More sharing options...
Pete M Posted July 25, 2009 Share Posted July 25, 2009 I believe so, yes. This is what it'll look like inside (sorta, since the images are of a different vehicle) And this is the one on a YJ (pretty much the same as ours): Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now