oldrusty Posted June 18, 2009 Share Posted June 18, 2009 I have a recently rebuilt 727 auto in my 68 satelitte that is giving me problems. On my initial test drive the trans would shift from first to second but refused to shift into drive until I got it up to about 50 mph or so. I went home and adjusted the kickdown as short as I could make it and everything seemed ok. Took the car for another ride today and all was good until I stopped at the local NAPA for abou ten minutes. Left there to go hame and I'm back to not wanting to shift from 2nd to 3rd. Any ideas? Link to comment Share on other sites More sharing options...
aemsee Posted June 19, 2009 Share Posted June 19, 2009 How is the 1-2 shift? Link to comment Share on other sites More sharing options...
oldrusty Posted June 19, 2009 Author Share Posted June 19, 2009 1 2 shift is crisp seems fine. trans just won't shift from 2nd to 3rd Link to comment Share on other sites More sharing options...
aemsee Posted June 20, 2009 Share Posted June 20, 2009 Make sure that your linkage is properly adjusted and you are truely in drive and not manual second. If that is OK you may have a valve body or govener pressure problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now