SuperWade2 Posted June 1, 2009 Share Posted June 1, 2009 I'm going to yank my entire dash to fix the rust spot up under on the cowl are while we are in the dry time through our summer. I can start pulling screws, but wanted to see if anyone had a writeup with pics or could offer some advise. Link to comment Share on other sites More sharing options...
mjeff87 Posted June 1, 2009 Share Posted June 1, 2009 there's a couple of screws behind the HVAC vents on both sides that you have to pop the vents to get at. Also, there are (IIRC) 4 screws/bolts at the very front right where the winshield meets the body that can be a pain to get at. Once you get all the fasteners out, roll the dash assembly forward carefully and you can reach behind it (you can use a small mirror to see if you can't pull it far enough to get your head behind it) and unclip the wiring harness for the radio, cig lighter and HVAC. You'll probably snap off a couple of clips, too :yes: Jeff edit: and the HVAC tubes that attach to the outer vents are a pain to get off of the vent assemblies. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now